Premium

Sunday Gun Day XIX - The Marvelous Mr. Weatherby

Credit: Ward Clark

The Velocity Race, Part Two

Since last week’s post was about Charles Newton and his contributions to the high-velocity rifle phenomenon, it seems only appropriate to make this week’s post about another champion of high-speed bullet launching.

Shooting sports is a place where one man can have a big influence. In the post-World War II sporting rifle market, few people can claim to have had as big an influence as Roy Weatherby. His iconic guns and cartridges weren’t to everyone’s tastes, but they made a big mark on the American sporting gun scene.

The Man

Weatherby was born in Kansas in 1910, then 1945 found the young Roy in Huntingdon Beach, California, fortunately before that state became a garbage- and feces-covered craphole. He and his wife Camilla had a house there, and Roy had a business – a 25 by 70-foot closet that bore the name “Weatherby’s Sporting Goods.”

Weatherby was an incorrigible tinkerer. It is not known if the late Charles Newton had any influence on the young Weatherby, but it would not be surprising if that was the case, because Weatherby’s first efforts were directed at the development of high-velocity centerfire rifle cartridges. In 1945, the velocity race that Newton had started was about to shift into high gear; Roy Weatherby was positioned to take a commanding lead in that race.

The Plan

In 1945, many gun writers like Elmer Keith were proponents of large-bore rifles firing heavy bullets at moderate velocities. The .30-06 was already something of a standard in the game fields of North America. A few people used the .300 H&H, a real powerhouse for the time, and the .35 Whelen, using the .30-06 case necked up to .35 caliber, was a popular wildcat.

Around that same year, Roy Weatherby’s tinkering produced his first proprietary cartridge, the .220 Weatherby Rocket. This was something of an “improved” .220 Swift, based on that case but blown out some to increase powder capacity. Until this point, the .220 Swift had been the velocity champion in bolt-action (and indeed, any) rifles, firing a 40-grain .22 slug at over 4,000 fps. The Weatherby round improved on this some, managing to drive a 50-grain slug at the speeds achieved in the Swift with a bullet 20 percent lighter; but the Rocket wasn’t to be the pattern Weatherby would follow.

The Cartridges


In that same year, 1945, Weatherby was looking to introduce his high-velocity ideas into the world of big game cartridges. He hit upon the big belted .300 and .375 H&H cases as the ideal starting point, as they had considerably greater powder capacity than the .30-06 family of cases. To improve gas flow in the cartridge, he came up with a double-radius shoulder, something new that made forming the cases a little more complicated and therefore a little more expensive; but Weatherby rounds and rifles were never budget items.

In 1944 and 1945, Weatherby introduced three new cartridges:

The .257 Weatherby Magnum was based on the .375 H&H cartridge shortened to 2.5 inches, blown out with the double-radius shoulder, and necked down. This round, rumored to have been Roy Weatherby’s personal favorite, can launch a 115-grain bullet at 3,400 fps. That, folks, is smoking, even by today’s standards.

The .270 Weatherby Magnum drove a 130-grain bullet at 3,300 fps, about 400 fps than the standard .270 Winchester load favored by Jack O’Connor. This round was, again, based on the .375H&H case shortened and necked down.

The .300 Weatherby Magnum is the most popular of Weatherby’s proprietary cartridges. The big .300, until recently the most powerful .30 caliber commercial rifle cartridge made, was based on a blown-out .300 H&H case and launched a 180-grain pill at over 3,200 fps.

Weatherby was looking for velocity, and his new cartridges gave shooters that, in spades. In marketing his cartridges and later, his rifles, Weatherby maintained that high-velocity cartridges gave more killing power than lower-velocity rounds firing bigger, heavier slugs. In this, he ran afoul of some of the older-school gun scribes like Elmer Keith, but Weatherby stuck to his guns, and gradually his cartridges gained a following. Quite a few notable people endorsed Weatherby’s rifles, John Wayne among them; the resulting publicity sold more rifles and funded the development of more high-velocity rounds.

In 1947, Weatherby came out with two more cartridges, again based on the H&H case:

The 7mm Weatherby Magnum was next; the big 7mm, on the same case as the .300 Weatherby, launched a 140-grain 7mm slug at 3,200 fps and would heft even the big 175-grain A-Frame slugs at over 3,000.

In that same year, Weatherby broke into the heavy rifle market, blowing out the .375 H&H case with the double-radius shoulder and naming this the .375 Weatherby Magnum. In this round Weatherby missed the mark a bit; while the new heavy round would loft a 270-grain projectile at 2,800 fps--pretty respectable for a rifle intended for African plains game-- its performance wasn’t enough greater than the time-tested .375 H&H to gain a lot of traction. The Weatherby did have the advantage of being able to fire .375 H&H rounds in the rifle, thus fire-forming the case to Weatherby’s specs for use thereafter, making it in essence a “.375H&H Improved,” but this wasn’t to prove popular; that may well have led Roy Weatherby to his next step.

In 1955, Weatherby scaled up, with two new cartridges based on a new, larger case of Weatherby’s design. As the basis of his new rounds, Weatherby took the .416 Rigby case, added a belt, and introduced two versions: The .378 Weatherby Magnum and the .460 Weatherby Magnum. The latter round was, at the time of its introduction, the most powerful commercial rifle cartridge in production. Now, at last, Weatherby caught the attention of the safari market. Within a few years, the big .460 was as popular among African safari guides and professional hunters as the old reliable .458 Winchester.

One other well-known, dangerous game cartridge resulted from this, but it wasn’t a Weatherby product; in 1976, Colonel Arthur Alphin necked up the .460 case to produce his .500 A-Square.

1963 saw the introduction of the .340 Weatherby Magnum, introduced as a response to Winchester’s .338 Magnum. This new round left the .338 Winchester Magnum in the dust, firing a 225-grain slug at over 3,000 fps. With my own .338, I’ve never broken 2,800 with a bullet of that weight, and I’m not shy about pushing my loads up to the line.

In 1964, Weatherby introduced the only .22 caliber belted magnum at that time, the .224 Weatherby Magnum. This foray into small bores finally displaced the .220 Swift as the velocity champion of the .22 calibers. And finally, in 1968, Weatherby’s last magnum, the .240 Weatherby Magnum, set new speed records for commercial 6mm cartridges.

Still, cartridges are of little use without a rifle, and Weatherby’s rifles were as distinctive as his cartridges.

The Guns

To be honest, I was never a fan of Weatherby’s original style in bolt rifles. The appearance of his first rifles was very distinctive. Weatherby used beautiful wood and fine, high-polished bluing, but the stocks feathered a high Monte Carlo and a big cheekpiece, contrasting rosewood fore-end and pistol grip caps with white spacers, and white spacers on the butt pad. Many people liked them, based on how they sold, but even back in the Seventies when I was coming up, I always found them a little garish.

But you can’t argue with success. Shiny, the Weatherby rifles may have been, and on the expensive side to boot, but the combination of solid bolt actions and powerful, high-velocity cartridges was a big seller.

Weatherby’s first rifles, the so-called “Southgate” rifles after Roy’s big new store in Southgate, California, were built on FN ’98 Mauser actions. Most of the Southgate rifles were built for Weatherby calibers, but old Roy would turn out a fine rifle in a standard caliber as a custom item if a customer asked for one. In 1956, Weatherby contracted with Schultz & Larsen to build rifles for the big new .378 and .460 Magnums on their beefy Model 54 bolt action, but that situation only lasted a couple of years, as Roy Weatherby’s crowning achievement was in the works.

In 1958, Roy Weatherby’s ideal rifle finally took form with the introduction of the Mark V. This was something unlike the Mauser 98 and Schultz & Larsen actions of previous Weatherby rifles; the Mark V had nine, small locking lugs at the front of the big, hefty bolt. When carefully fitted, as was generally the case with Weatherby rifles, this made for a very strong action. The first Mark V actions were made by Pacific Founders, Inc. and assembled at Southgate, but demand quickly outstripped Pacific’s capacity, so Weatherby moved production to Sauer, who was similarly unable to keep up, and then to Howa in Japan.

Mark V production muddled along unchanged from 1958 to 1963, the only notable difference being the relocation of the safety from the receiver to the bolt shroud, when the manufacturer moved from Pacific to Sauer. But in 1964, Weatherby determined the need for a scaled-down version to go with the new .224 Weatherby Magnum, and so the six-lug “Varmintmaster” was born. The six-lug Varmintmaster was later offered in .22-250, the first production Weatherby in a non-Weatherby commercial caliber (the company would build a Mark V custom in almost any caliber) and later the full-size Mark V was offered in the immortal .30-06.

Some years later, Weatherby would begin offering the Mark V in a variety of non-Weatherby calibers, but only in the six-lug versions. This has added some collector’s value to the few nine-lug .30-06s out there. If you have one, let me know; I’d happily give you a couple hundred bucks for it.

This new Weatherby had some significant things going for it. The nine locking lugs were placed on a reduced bolt head, meaning there was no necessity for locking lug races in the action; this made the action very smooth in operation. As the action was designed for high-pressure, high-velocity rounds, the bolt body had three holes to vent hot gases in the event of a case failure, and the oversized bolt shroud likewise shielded the shooter’s face from hot gas in such an event. The later, bolt-mounted safety was robust, locking the firing pin in place – although I maintain to this day that the only safety that one should rely on is the one between your ears.

The Mark V was a fine rifle, if a bit showy, but it was also expensive. So, in 1970, Weatherby made a deal with Howa to produce a rifle with the traditional Weatherby style using Howa’s Model 1500 action, chambered in standard, non-Weatherby calibers. This became the Weatherby Vanguard, and with this rifle, Weatherby aimed (heh) at the market held firmly by the Remington 700 and Winchester Model 70 rifles.

Weatherby didn’t neglect the rimfire market, either. In 1964, Weatherby released the semi-auto Mark XXII, a slick, pretty rifle firing from a 10-round detachable magazine. My oldest friend Dave had one for some time and enjoyed it, but it was an expensive proposition for killing squirrels, so he eventually traded it off. I remember it as a real tack driver.

Current Mark V barreled actions are built by ATEK of Brainerd, Minnesota, while the Vanguard continues to be manufactured by Howa in Japan. The semi-auto Mk XXII, sadly, has gone out of production as of 1989, although currently, Weatherby offers an Anschutz .22 bolt gun bearing the “Weatherby Mk XXII” label.

The Legacy

Roy Weatherby died in 1988 at age 77, having changed the American sporting rifle world forever. Five years earlier, he had passed leadership of Weatherby, Inc. to his son Ed Weatherby, who still runs the company today. In 2022, the company announced it was finally leaving southern California for the more gun-friendly environs of Sheridan, Wyoming. A portion of the Weatherby estate went to fund the Weatherby Foundation International, a non-profit organization dedicated to educating the non-hunting public about the benefits of ethical, scientifically managed sport hunting.

Most of Weatherby’s current rifles – and shotguns – are a tad more subdued, most of the current production bearing synthetic stocks. These have many advantages on a hunting rifle, and indeed my hunting rifles tend to wear synthetic stocks, but I’m still pleased that Weatherby does continue to offer the Mark V and the Howa-actioned Vanguard, as well as the Orion shotguns, with fine walnut furniture as well. The same applies to Weatherby’s current scattergun offerings, which include the very fine Orion over/under and the 181, Element, and SA-08 semi-autos.

The Weatherby Magnum line of cartridges has since been expanded by two, the 6.5-300 Weatherby Magnum and the .30-378 Weatherby Magnum.

The pairing of a Weatherby rifle and an appropriate Weatherby cartridge will still serve as a fine rifle for the game fields anywhere on the planet. John Browning or Sam Colt, he wasn’t, but Weatherby broke some new ground in sporting rifles and founded a company that persists today. That’s not a bad legacy; not bad at all. And not too shabby for a guy who started building rifles in his garage.

Recommended

Trending on RedState Videos